Has anyone attempted to repair/replace an IR Blaster port on a Slingbox Pro? Mine seems to have dislodged inside of the unit. I could bypass the IR issue (and my DVR) by just running a coax connection from the cable outlet, but the coax port is not recognizing anv ideo feed (I've swapped cables, verified that the same cable/connection works on other devices, etc). I'm suspicious that there may be an issue with the coax input port as well. All of the other inputs are working just fine.
Before I open up my unit (several years old and well out of warranty range), wanted to see if anyone else had tackled a similar problem.