I have a Dish VIP622 and the IR Blaster is sending an IR signal out and I've converted my receiver to work with IR on the regular remote. Any ideas? I'm on the verge of getting the Dish receiver with a built in Slingbox.
Matching Remote Addresses ? Unless specified otherwise the Slingbox assumes the default address.
What are remote matching addresses?
Covered in Chapter 10 of your manual. http://www.dishnetwork.com/supportsection/manuals
My 6.4 remote and receiver were original set up for a UHF signal. I reconfigured them for IR so the receiver would work with the IR Blaster. Is there something else I missed?
That was why I mentioned the Remote Addresses, it could be your box has been set to #2 while the Slingbox is using #1. Have you confirmed the address ?
The remote address is 6 on the receiver/remote combination. How do I find out what the Slingbox is on?
I changed the remote address to 1 and now my Slingbox is working. Thank you!
Glad to help
Retrieving data ...