Thanks for all the great work you do on this forum.
I have attached the IR Scope file and my RMDU file for the remote for my Panasonic DMR-EX99VEB. As it is a DVD, HDD, VCR Recorder I am not able to get the right setup for my Slingbox.
I have a Slingbox Pro purchesed in the UK in 2009, not sure if its PL or RV, Using Panasonic Protocol.
Hope you could check if my programming is right and maybe what type of model etc a 3-1 machine like the Panasonic will work best with.
When working I'll post on Custom remote site
OK, what you appear to be trying is to control 2 different devices with the same Custom Remote (DVR with 176.16 and TV? with 128.0). Normally this is impossible but you are lucky in that the Panasonic protocol does allow you to use different devices.
In the Setup page of the RMDU file you hadn't put in any device or sub device number, not sure if that was intentional but obviously any BIN file produced by that would not work. So I have changed the protocol to a Panasonic Multi and set the device and sub-device numbers in the Function TAB.
However, I have never seen a case like this where the majority of the DVR buttons use 176.16 but a few use 176.17, in particular the 4 colour buttons. I have used 176.17 but if those buttons do not work switch them to 176.16.
Thanks for your help,
Have had a bit to do, but updated my remote etc recently. Figured out I hadn't inputted the code for Select/OK!
The codes are updated, but my skin is all over. Looking for the same layout as in this thread: http://placeshiftingenthusiasts.com/forum/sling-player-remotes/panasonic-dmr-bs750-remote/?value=panasonic&type=1&include=1&search=1, post no 9
I have not changed skins before, so would need some instructions.
Please find enclosed updated files for this machine.